65810WAR-6K
The Sperry Marine X-Band Radar Scanner Unit comes provided with 4, 6 and 8 ft antenna, and 10kW or 25kW options.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
FAR-2117 BB
Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.
JMA-9110
X-band series, JMA-9100 is a series of radar stations manufactured by JRC. The MA-9100 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
FAP-5002
Furuno Navpilot 511 FAP-5002 Autopilot computer processor unit.
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
FAP-7002
Furuno Navpilot 700 series autopilot FAP-7002 processor unit.
JMA-9122
X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
PT-500
Yokogawa’s PT500 Autopilot Series conforms to the technical requirements for the performance standard determined by IMO resolution A342 and meet type approval issued by Class NK (Approval No. KF96EQ-001). These...
T65801805-4
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
T91003765-6
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...
T65801801-10
A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.
T65825816
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
PR-9000
The model PR-9000 is the latest autopilot system from TOKYO KEIKI.The PR-9000 is designed using the latest technology from a wealth of engineering and manufacturing experience of navigational instruments. Safety,...
T65830642-3
Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.
PR-8000
Autopilot Tokimec PR-8000 - The marine autopilot receives signals from directional sensors such as the gyrocompass and uses them to automatically control the helm for navigation.
T65801811-9
This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.
PR-6000
Autopilot Tokimec PR-6000 was designed with three fundamental concepts in mind: expanding and strengthening helm functions, thorough safety considerations, and improved reliability and more intelligent maintenance...
PR-2000
Autopilot Tokimec PR-2000, widely regarded as a system with stable performance and easy operation for fishing boats, coastal vessels and merchant ships, has long enjoyed great popularity among all users, with more...
T65830812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
PB355
Yokogawa control stand PT500 hand steering unit with steering angle indicator and steering direction indicator lamps.
T65801813-8
On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.
PT500 ORI
Yokogawa PT500 override indicator provide O.R.FAIL and LAMP TEST.
TVH-03-2001
Sperry Marine BME Slave Connection Unit.