Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.
X-band series, JMA-9100 is a series of radar stations manufactured by JRC. The MA-9100 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
This marine transponder system by SAAB is designed for safe marine navigation of ships and vessels. It offers VHF Radio coverage which helps the mariner in decision making in crucial safety conditions. As a fully IMO...
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
Yokogawa’s PT500 Autopilot Series conforms to the technical requirements for the performance standard determined by IMO resolution A342 and meet type approval issued by Class NK (Approval No. KF96EQ-001). These...
The JHS-183 is an important piece of navigation equipment for collision avoidance and maneuvering, featuring an all new display and a transponder designed for long range reception.
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
The JHS-182 is an important piece of navigation equipment for collision avoidance and maneuvering, featuring an all new display and a transponder designed for long range reception.
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...
Furuno's FA170 is a Class A AIS Transponder with a 4.3" Color LCD Display. It displays symbols for AIS-equipped vessels, AIS-SART's, coastal stations and other aids to navigation within VHF range. AIS data can be...
A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.
The Simrad V5035 is a fully featured Class-A AIS transponder system, IMO type approved for use aboard SOLAS vessels. As a standalone solution with integrated display and included GPS antenna, junction box, and pilot...
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
The Simrad MX535B is a Class-A AIS transponder system. This is the most competitively priced Simrad Class-A AIS system to date, and offers both standalone and expanded system configuration options.
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
The model PR-9000 is the latest autopilot system from TOKYO KEIKI.The PR-9000 is designed using the latest technology from a wealth of engineering and manufacturing experience of navigational instruments. Safety,...