Sperry Marine Pulse Bearing PCB X-Band

Item Code:

T65801805-4

Brand:

Sperry Marine

Condition:

Refurbished

During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the two Pozidriv screws, check that both pairs of plain and single coil washers are above the top surface of the mounting bracket and not trapped beneath it.

Send Enquiry

Product Details

Reference T65801805-4

Sperry Marine Radar Motor Drive PCB

T65801811-9

This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.

Sperry Marine Radar Trigger Board PCB Radar

T65801801-10

A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.

JRC JMA-9122 Stand Alone Unit

JMA-9122

X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....

Raytheon Anschutz ST22 Outer Sphere PCB

110-233.101X10

This PCB is used on a Raytheon Anschutz ST22 Gyro.

Furuno FAR-2117 BB Radar (NEW)

FAR-2117 BB

Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.

Sperry Marine Pulse Bearing PCB X-Band

Sperry Marine Radar Motor Drive PCB

Sperry Marine Radar Trigger Board PCB Radar

JRC JMA-9122 Stand Alone Unit

Raytheon Anschutz ST22 Outer Sphere PCB

Furuno FAR-2117 BB Radar (NEW)

Enquire Now

Menu

Account

Search