65810WAR-6K
The Sperry Marine X-Band Radar Scanner Unit comes provided with 4, 6 and 8 ft antenna, and 10kW or 25kW options.
+65 6909 8211/13, info@globalshipspares.com (Asia)
Categories
Filter By
Filter By
BST 2201
Raytheon Anschütz Standard 22 Gyro Compass ensures highest accuracy and maximum reliability under all environmental conditions. Operational safety of the gyro compass was dramatically increased due to a unique...
1-D5622-001
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
074807 REV C
The first digital marine gyrocompass of its type to be designed as a single unit and of unparalleled compactness in a polyurethane hard foam housing, the NAVIGAT X MK 1 digital gyrocompass has a low weight. This...
FAR-2117 BB
Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.
1-E3561-301
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
JMA-9110
X-band series, JMA-9100 is a series of radar stations manufactured by JRC. The MA-9100 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
074799 REV B
The NAVIGAT X MK 2 Digital Gyro Compass system provides a cost-effective solution that satisfies the international carriage requirements for a type-approved marine gyrocompass.
1-53836-K269-01
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
CMZ 500
Yokogawa CMZ 500 is a highly reliable, accurate gyrocompass, featuring a compact, lightweight, low power consumption design. The CMZ 500 fully complies with the gyrocompass performance standard IMO recommended A.424...
1-53836-K269
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
049050-0000
Sperry supporting liquid, used on gyrocompass Navigate X MK1 and MK2.
JMA-9122
X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
020672-0000-000
This main board is the main control of gyro system. Two ship supply input to mainboard. One AC supply output 26Vac from transformer which step down AC ship supply from 230Vac or 115Vac via link and other 24Vdc direct...
T65801805-4
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
4991-3000
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin and...
T91003765-6
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...
074571-0000-000
This is a mercury gyrosphere only used in mercury type container.
T65801801-10
A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.
074859-0000-000
This is a Type 4894-AD Terminal Box, used for Type 5016 Bearing Repeater Compass.
T65825816
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
074834-0000-005
The 4891 Universal Digital Repeater is to display live heading (HDG).
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.