FS-2571C
Furuno FS-2571C SSB Radio Telephone Control Unit With HS-2000 Handset.
+65 6909 8211/13, info@globalshipspares.com (Asia)
Categories
Filter By
Filter By
65810WAR-6K
The Sperry Marine X-Band Radar Scanner Unit comes provided with 4, 6 and 8 ft antenna, and 10kW or 25kW options.
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
BST 2201
Raytheon Anschütz Standard 22 Gyro Compass ensures highest accuracy and maximum reliability under all environmental conditions. Operational safety of the gyro compass was dramatically increased due to a unique...
AA-50
GMDSS Compliant, MF/HF DSC, Scanning, Watch Receive.
074807 REV C
The first digital marine gyrocompass of its type to be designed as a single unit and of unparalleled compactness in a polyurethane hard foam housing, the NAVIGAT X MK 1 digital gyrocompass has a low weight. This...
Vision Master FT ECDIS
The VisionMaster FT ECDIS (electronic chart display and information system) offers you a complete solution for easy route planning and paperless navigation. The VisionMaster FT ECDIS is simple to operate for any type,...
FAR-2117 BB
Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.
JMA-9110
X-band series, JMA-9100 is a series of radar stations manufactured by JRC. The MA-9100 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
074799 REV B
The NAVIGAT X MK 2 Digital Gyro Compass system provides a cost-effective solution that satisfies the international carriage requirements for a type-approved marine gyrocompass.
FM-8900S
The Furuno FM8900S is a Semi-duplex 25-Watt VHF Radiotelephone with a built-in Class-A DSC and CH70 watch Receiver. It features an easy-to-read, high-contrast 4.3″ bright color LCD, enhanced noise reduction and...
CQD-2121
This is a standard terminal board for JRC JAN-701B/901B ECDIS.
CMZ 500
Yokogawa CMZ 500 is a highly reliable, accurate gyrocompass, featuring a compact, lightweight, low power consumption design. The CMZ 500 fully complies with the gyrocompass performance standard IMO recommended A.424...
049050-0000
Sperry supporting liquid, used on gyrocompass Navigate X MK1 and MK2.
CDC-1338/1339
This is a sub-lan ethernet board for JRC JAN-701B/901B ECDIS.
JMA-9122
X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
020672-0000-000
This main board is the main control of gyro system. Two ship supply input to mainboard. One AC supply output 26Vac from transformer which step down AC ship supply from 230Vac or 115Vac via link and other 24Vdc direct...
CQD-2130
This is a option terminal board for JRC ECDIS JAN-701B/901B.
T65801805-4
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
4991-3000
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin and...
JSS-2150
The JSS 2150 MF/HF has Digital Selective Calling (DSC*) as standard with built in Class A 6CH DSC watch-keeping receiver. You can transmit and receive digital selective calls for quick and efficient establishment of...
T91003765-6
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...