+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)

info-europe[at]globalshipspares[dot]com (EU)

Products

7000 109-141
The Saab R4 Navigation Sensor should be connected to the included antenna, which in the GPS configuration is a MGA-2 GPS antenna and in the DGPS configuration is a MGL-4 combined GPS/Beacon antenna.
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
074807 REV C
The first digital marine gyrocompass of its type to be designed as a single unit and of unparalleled compactness in a polyurethane hard foam housing, the NAVIGAT X MK 1 digital gyrocompass has a low weight. This...
Vision Master FT ECDIS
The VisionMaster FT ECDIS (electronic chart display and information system) offers you a complete solution for easy route planning and paperless navigation. The VisionMaster FT ECDIS is simple to operate for any type,...
KW950-E
The KW950-E is programmed to output a single line of data at certain intervals. The data is printed on a tandard low cost printer, or to a PC for recording on disk.   
7000 100-550
This marine transponder system by SAAB is designed for safe marine navigation of ships and vessels. It offers VHF Radio coverage which helps the mariner in decision making in crucial safety conditions. As a fully IMO...
86106
Introducing the YOUNG Model 86106 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications...
020672-0000-000
This main board is the main control of gyro system. Two ship supply input to mainboard. One AC supply output 26Vac from  transformer which step down AC ship supply from 230Vac or 115Vac via link and other 24Vdc direct...
05106
The Wind Monitor MA is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment.The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse...
T65801805-4
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
T91003765-6
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...

Menu

Account