DAZ25
DAZ25 is a depth repeater from L3 (Part of Elec LAZ 5000/5100 echo sounder).
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
BST 2201
Raytheon Anschütz Standard 22 Gyro Compass ensures highest accuracy and maximum reliability under all environmental conditions. Operational safety of the gyro compass was dramatically increased due to a unique...
074807 REV C
The first digital marine gyrocompass of its type to be designed as a single unit and of unparalleled compactness in a polyurethane hard foam housing, the NAVIGAT X MK 1 digital gyrocompass has a low weight. This...
Vision Master FT ECDIS
The VisionMaster FT ECDIS (electronic chart display and information system) offers you a complete solution for easy route planning and paperless navigation. The VisionMaster FT ECDIS is simple to operate for any type,...
KW950-E
The KW950-E is programmed to output a single line of data at certain intervals. The data is printed on a tandard low cost printer, or to a PC for recording on disk.
074799 REV B
The NAVIGAT X MK 2 Digital Gyro Compass system provides a cost-effective solution that satisfies the international carriage requirements for a type-approved marine gyrocompass.
NT990 HDI
Navitron NT990 HDI Heading Data Interface 990 HDI/2 Radar & Heading Repeater IF
CQD-2121
This is a standard terminal board for JRC JAN-701B/901B ECDIS.
CMZ 500
Yokogawa CMZ 500 is a highly reliable, accurate gyrocompass, featuring a compact, lightweight, low power consumption design. The CMZ 500 fully complies with the gyrocompass performance standard IMO recommended A.424...
86106
Introducing the YOUNG Model 86106 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications...
049050-0000
Sperry supporting liquid, used on gyrocompass Navigate X MK1 and MK2.
CDC-1338/1339
This is a sub-lan ethernet board for JRC JAN-701B/901B ECDIS.
06206
The Marine Wind Tracker has special features for shipboard use.
Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, M/S. Maximum wind speed is also shown. Wind direction information is clearly...
020672-0000-000
This main board is the main control of gyro system. Two ship supply input to mainboard. One AC supply output 26Vac from transformer which step down AC ship supply from 230Vac or 115Vac via link and other 24Vdc direct...
CQD-2130
This is a option terminal board for JRC ECDIS JAN-701B/901B.
05106
The Wind Monitor MA is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment.The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse...
4991-3000
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin and...
JAX-9B
The JAX-9B weather facsimile receiver is a very compact and lightweight solution, incorporating a set of enhanced features that allows for flexible operation.
074571-0000-000
This is a mercury gyrosphere only used in mercury type container.
JAX-91
The JAX-91 Weather Facsimile Receiver is the paper base recording system, It is easy to check by the automatic printout function. On top of it, a new function characterizes that as a suitable Frequency is...
074859-0000-000
This is a Type 4894-AD Terminal Box, used for Type 5016 Bearing Repeater Compass.