65810WAR-6K
The Sperry Marine X-Band Radar Scanner Unit comes provided with 4, 6 and 8 ft antenna, and 10kW or 25kW options.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Filter By
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
Vision Master FT ECDIS
The VisionMaster FT ECDIS (electronic chart display and information system) offers you a complete solution for easy route planning and paperless navigation. The VisionMaster FT ECDIS is simple to operate for any type,...
FAR-2117 BB
Fully meet the latest performance standards of IMO for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.
JMA-9110
X-band series, JMA-9100 is a series of radar stations manufactured by JRC. The MA-9100 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
CQD-2121
This is a standard terminal board for JRC JAN-701B/901B ECDIS.
CDC-1338/1339
This is a sub-lan ethernet board for JRC JAN-701B/901B ECDIS.
JMA-9122
X-band series, JMA-9122 is a series of radar stations manufactured by JRC. The JMA-9122 radar has an updated signal processing system, which ensures the safety and reliability of the received data during the voyage....
CQD-2130
This is a option terminal board for JRC ECDIS JAN-701B/901B.
T65801805-4
During removal and refitting of the mounting bracket, take care not to damage the teeth on the pulse disc assembly that run between opto-couplers mounted on the rear of the Pulse Bearing PCB. Before re-tightening the...
T91003765-6
Sperry x-band motor gear, Standard speed unit 250VA.High-speed unit 370VA.This motor is a 3-phase electronically commutated DC motor. The motor commutation drive signals are supplied by the Motor Drive PCB, which can...
T65801801-10
A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.
CQC-1219
This back plane motherboard is used on JRC Ecdis JAN 701B/901B.
T65825816
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
T65830642-3
Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.
NBD-904
This Power Supply Unit is for JRC ecdis JAN 701B/901B.
T65801811-9
This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.
