DAZ25
DAZ25 is a depth repeater from L3 (Part of Elec LAZ 5000/5100 echo sounder).
+65 6909 8211/13, info@globalshipspares.com (Asia)
Categories
Filter By
Filter By
Filter By
Vision Master FT ECDIS
The VisionMaster FT radar/ECDIS from Sperry Marine provides intelligent functions for safe navigation, exceeding IMO requirements for additional safety at sea. Based on the VisionMaster FT software, this particular...
NRC-333 PAC
The Navtex receiver automatically receives and prints out Navtex service broadcasts supplied in English. Its function receives and prints out various types of information broadcast at a frequency of 518 kHz, such as...
1-D5622-001
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
Vision Master FT ECDIS
The VisionMaster FT ECDIS (electronic chart display and information system) offers you a complete solution for easy route planning and paperless navigation. The VisionMaster FT ECDIS is simple to operate for any type,...
KW950-E
The KW950-E is programmed to output a single line of data at certain intervals. The data is printed on a tandard low cost printer, or to a PC for recording on disk.
1-E3561-301
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
NCR300A
The Navtex receiver automatically receives and prints out Navtex service broadcasts supplied in English. Its function receives and prints out various types of information broadcast at a frequency of 518 kHz, such as...
NT990 HDI
Navitron NT990 HDI Heading Data Interface 990 HDI/2 Radar & Heading Repeater IF
1-53836-K269-01
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
NX-300
Furuno’s NX300 paperless Navtex receiver is the most economical way of monitoring navigational warnings, meteorological warnings, search and rescue information and other data for ships sailing within 200-400 n.m. of...
CQD-2121
This is a standard terminal board for JRC JAN-701B/901B ECDIS.
86106
Introducing the YOUNG Model 86106 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications...
1-53836-K269
KIDDE GRAVINER OIL MIST Detector continually monitors the oil mist density in the crank space. If the oil mist density value is greater than stored alarm values, it alerts the crew and shutdowns the engine to prevent...
CDC-1338/1339
This is a sub-lan ethernet board for JRC JAN-701B/901B ECDIS.
NX-700A
The NX-700 can receives two channels simultaneously. One is set for 518 kHz to receive international NAVTEX messages and another is selectable from 490 or 4209.5 kHz for domestic or local NAVTEX messages. These...
06206
The Marine Wind Tracker has special features for shipboard use.
Wind speed is displayed in your choice of units: KNOTS, MPH, KM/H, M/S. Maximum wind speed is also shown. Wind direction information is clearly...
CQD-2130
This is a option terminal board for JRC ECDIS JAN-701B/901B.
05106
The Wind Monitor MA is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment.The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse...
FAX-410
The FAX-410 is a marine weather facsimile receiver designed to receive and print high quality, high definition weather charts and satellite images, which are transmitted from onshore stations located around the world.
NX-700B
FURUNO NX700 is a dual-channel NAVTEX receiver for SOLAS ships complying with the new NAVTEX performance standard MSC.148(77) which is implemented on and after 1 July 2005. The NX700 can receives two channels...