KT005
Gyrosphere for Yokogawa CMZ 700. Requires at least 1 hour for gyrosphere to settle.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Filter By
T65830812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
133 407
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
T65801813-8
On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.
133-811
The Raytheon Anschutz Digital Repeater Compass indicates heading by using a large display. Heading can be read easily from different viewing angles up to a distance of ten metres. The decimal degree digit is smaller...
TVH-03-2001
Sperry Marine BME Slave Connection Unit.
4923-AA
The NAVITWIN III Heading Management System displays and monitors a minimum of one and a maximum of three heading sources (2 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
65900667-3C
Sperry Marine VMFT Control Panel is used in all Sperry Marine stand alone radar systems.
MKR050
Steering repeater compass with vernier card, LED dimmer and build-in automatic heading alignment.
65847A
This is a Sperry Marine radar serial interface unit.
110-233.101X10
This PCB is used on a Raytheon Anschutz ST22 Gyro.
DG43NB
This is a Sperry Marine VMFT original manufacturer approved motherboard. Supports CD Rom, video card, hard disk, sc2 or cs3 card, rams, USB port, VGA port.
074829-0000-000
The Northrop Grumman Sperry Marine Gyro Compass is the most reliable in the market due to its unique feature to float in supporting fluid inside the gyrosphere container.
65900614-3E
Sperry VMFT Trackball is used on all Sperry Marine stand alone unit systems.
026560-0000-000
Sperry Marine switch over unit enable two gyro system to be connect together so that either each heading maker can be control and display in UDR Bulkhead Display.
65901AN-7A
This is a Sperry Marine VMFT processor unit running on either Windows XP or Windows 7.
111-006.E001
The Gyrosphere for Standard 20 and 22, item number 111-006.E001AT.
NWZ-170-E
JRC Monitor 23.1" complies with IMO regulations on monitor display size in radar.
TG-8000
TG-8000 is designed based on previous TG model which has been installed on more than 8000 ships, keeping its high reliability, enhanced follow-up performance and interfacing features for equipment. TG-8000 is designed...
65800700
This no/off switch is to control scanner control unit.
GM-20
This series is a compact version of the ES Series, and is chiefly used in small vessels. Gyrocompass instrumentation for heading reference is now available at reasonable cost to operators of small commercial vessels...
65837AA-AJ
Sperry Marine scanner control unit is to control scanner on/off.
ES-110
Gyrocompass tokimec ES-110, the newest type of ES series, is a compact and popularized gyrocompass. It is especially designed for medium and small vessels' uses, by TOKIMEC's latest mechatronics technology. ES-110...
T65830616-7
This Receiver Unit is used in Sperry Marine S-band transceiver unit.