Products (2)

Sperry Marine Radar Trigger Board PCB Radar

T65801801-10

A control board housed in the Transceiver. It controls the Modulator, Magnetron and sends signals to the Display to indicate when the magnetron has fired a pulse.

Sperry Marine Gyro Repeater Terminal Box

074859-0000-000

This is a Type 4894-AD Terminal Box, used for Type 5016 Bearing Repeater Compass.

Sperry Marine LAZ5100 Echo Sounder

52 603 8001

LAZ 5100 is the latest navigation echo sounder of L-3 ELAC Nautik, available as single- or dual-frequency unit. Transducers with frequencies from 24 kHz to 200 kHz can be connected, the maximum measuring range is 2...

Sperry Marine Transceiver Power supply X-Band

T65825816

This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...

Sperry Marine UDR Bulkhead Display

074834-0000-005

The 4891 Universal Digital Repeater is to display live heading (HDG).

Sperry Marine SC3 PCB Card VMFT

T65900812-3

This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.

Sperry Marine Gyro Repeater

074880-0001-000

This is a Type 5016 Bearing repeater compass. Does not come with Type 4894-AD terminal box.

Sperry Marine Radar Rotary Joint S-Band

T65830642-3

Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.

Sperry Marine Radar Motor Drive PCB

T65801811-9

This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.

Sperry Marine 30kW Modulator PCB S-Band

T65830812-6

The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...

Sperry Marine Input PCB Aloft Radar

T65801813-8

On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.

Sperry Marine BME Slave Connection Unit

TVH-03-2001

Sperry Marine BME Slave Connection Unit.

Sperry Marine Navitwin Ill

4923-AA

The NAVITWIN III Heading Management System displays and monitors a minimum of one and a maximum of three heading sources (2 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.

Sperry Marine VMFT Control Panel

65900667-3C

Sperry Marine VMFT Control Panel is used in all Sperry Marine stand alone radar systems.

Sperry Marine Ecdis-E (NEW)

ECDIS-E

The Electronic Chart Display and Information System ECDIS-E is an easy and cost-effective retrofit solution that complies with the latest performance standards. The ECDIS-E combines an optimised feature set with...

Sperry Marine Serial Interface Unit

65847A

This is a Sperry Marine radar serial interface unit.

Sperry Marine VMFT Motherboard

DG43NB

This is a Sperry Marine VMFT original manufacturer approved motherboard. Supports CD Rom, video card, hard disk, sc2 or cs3 card, rams, USB port, VGA port.

Sperry Marine Navigat X MK1 Gyrosphere-Mercury Free

074829-0000-000

The Northrop Grumman Sperry Marine Gyro Compass is the most reliable in the market due to its unique feature to float in supporting fluid inside the gyrosphere container.

Sperry Marine VMFT Trackball

65900614-3E

Sperry VMFT Trackball is used on all Sperry Marine stand alone unit systems.

Sperry Marine Switch Over Unit Gyro

026560-0000-000

Sperry Marine switch over unit enable two gyro system to be connect together so that either each heading maker can be control and display in UDR Bulkhead Display.

Sperry Marine VMFT Processor Unit

65901AN-7A

This is a Sperry Marine VMFT processor unit running on either Windows XP or Windows 7.

Sperry Marine Transmitter Unit w/1 Potentiometers(NEW)

074720-0000-000

Sperry Marine Transmitter Unit w/1 Potentiometers, 1 set limit switchses for up to +/-45 deg and one rudder midships switch.

Sperry Marine Isolation Switch

65800700

This no/off switch is to control scanner control unit.

Sperry Marine Navipilot 4000 Series(NEW)

Navipilot 4000

Northrop Grumman Sperry Marine’s NAVIPILOT 4000 is a highly reliable ship automation system that ensures fuel savings, operational safety and efficient steering. The innovative Autopilot is designed to learn your...

Products

Sperry Marine Radar Trigger Board PCB Radar

Sperry Marine Gyro Repeater Terminal Box

Sperry Marine LAZ5100 Echo Sounder

Sperry Marine Transceiver Power supply X-Band

Sperry Marine UDR Bulkhead Display

Sperry Marine SC3 PCB Card VMFT

Sperry Marine Gyro Repeater

Sperry Marine Radar Rotary Joint S-Band

Sperry Marine Radar Motor Drive PCB

Sperry Marine 30kW Modulator PCB S-Band

Sperry Marine Input PCB Aloft Radar

Sperry Marine BME Slave Connection Unit

Sperry Marine Navitwin Ill

Sperry Marine VMFT Control Panel

Sperry Marine Ecdis-E (NEW)

Sperry Marine Serial Interface Unit

Sperry Marine VMFT Motherboard

Sperry Marine Navigat X MK1 Gyrosphere-Mercury Free

Sperry Marine VMFT Trackball

Sperry Marine Switch Over Unit Gyro

Sperry Marine VMFT Processor Unit

Sperry Marine Transmitter Unit w/1 Potentiometers(NEW)

Sperry Marine Isolation Switch

Sperry Marine Navipilot 4000 Series(NEW)

Enquire Now

Menu

Account

Search