CMJ-462E
This gyro interface circuit is used in MKE1130 marine radar, series JMA-9110.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Filter By
110-233.X15
This pump, compl. is used in raytheon anschutz ST22 gyro system.
CDC-1186D
This ARPA processor circuit is used in MKE1130 marine radar, series JMA9110.
110-233.X02
Raytheon Anschutz Hemisphere Container will have two part. Upper and Lower Hemisphere Container.
CDC-1325
This AIS processor circuit is used in NEK1130 marine radar, series JMA-9110.
10169537
Tokimec TG8000 Inverter PWB is the master compass that control, went over-voltage or over-current happen.
CDC 1324
This Mounting Bracket is used in MKE1130 marine radar. series JMA-9110.
10189047 & 10160030
Tokimec TG8000 Step Motor With Belt and ENCC PWB full set.
CQC-1192
This motherboard is used in NKE1130 marine radar, series JMA9110.
10239379 & 10239380
Tokimec TG8000 brush have 16 point. Brush terminal will connect to MCC PWB J2 and J5 connector. Brush head should be sharp and suggest to replace every 4 year.
CME-363
This modulator circuit board is used in JRC JMA series radar.
10189501
Tokimec TG8000 Microcomproccesor Control Board (MCC PWB)
CBD-1779
This motor CTRL power circuit board is used in JRC JMA series radar.
10169503
Tokimec TG8000 Horizontal Control Board (HRZC PWB)
CBD-1783
This power supply circuit board is used in JRC JMA series radar.
074883-0001-000
Compass repeater for mounting to the bulkhead 360 ° / 10 °, with built-in indication of the source of the course and a dimmer, waterproof.
T65810812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
V8814TN
Yokogawa Novec Demnum Solvent is use for mercury type system.
T65900800-6A
The PCIO Board has three high speed serial input (38400 baud) and six low speed serial inputs (4800 baud).
Communication to the processor is via an embedded USB hub (TSU). Video and data to the scan converter (SC)...
073517-0000-000
Gyrocompass system NAVIGAT 200 for multiple gyrocompass systems, comprising101
1 Mastercompass NAVIGAT 200, with built-in control and display unit, for connection to 24V DC main supply and 24V DC back-up supply.
T91003746-4
Performance Monitor unit, which warns the operator of reduce radar performance.
May be integral with the turning unit.
130-613
The Operator Unit is designed so that users can operate all items of equipment
connected to a CAN bus
All the equipment integrated into the navigational system, such as the gyro compass, the
GPS compass and the...
T65830505-1C
A serial data link is used to communicate between the Transceiver and the
Console. If a separate Transceiver Unit is used, an RF feeder coaxial for S band
wave guide is used to transfer the microwave energy between...
V8114UR
Yokogawa Step Motor 200 Step, DC 4V, 0.95A, TS3617N1E1 23-07.