T91003746-4
Performance Monitor unit, which warns the operator of reduce radar performance.
May be integral with the turning unit.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
T65830505-1C
A serial data link is used to communicate between the Transceiver and the
Console. If a separate Transceiver Unit is used, an RF feeder coaxial for S band
wave guide is used to transfer the microwave energy between...
T65825812-7
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65801809-4
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
65601-222
The lower microwave transition casting is to protect the rotating joint probe.
65842A
Sperry Marine 2 way interswitch unit enables two radar systems to be connected together so that either Display may be connected to either Scanner Unit.
VMFT RADAR
The VisionMaster FT Radar series from Northrop Grumman Sperry Marine provides innovative marine navigation tools and support for safe navigation and collision avoidance, under all maritime conditions. The VisionMaster...
T65900660-2
Sperry Marine VMFT radar basic membrance panel assembly provide Rain/Sea/Gain control together with range and brilliance up/down couple with EBL function knob.
65800811-7A
This display processor PCB board is used in BME 250 radar processor.
65800814-8A
This Radar Processor PCB board is used in BME 250 radar processor.
EEV MG5473
MG5473 X-Band Magnetron - is a new version of the magnetron Gen4. Magnetrons Gen4 series are fully compatible with Gen2 and Gen3. Gen4 series Size preferably smaller, thus avoiding problems with the replacement. In...
EEV MG5223
Compact, rugged, lightweight magnetron MG5223 S-Band with a fixed pulse frequency, designed for use in marine radars. Magnetron MG5223 S-Band is safe and reliable in use and operation, operates in a frequency range of...
EEV MG5223F
Magnetron MG5223F S-Band - durable, lightweight, compact, has a power output of 30 kW and operates in the frequency band 3040 - 3060 MHz. MG5223F S-Band is designed for use in marine radars. Magnetron MG5223F S-Band...
65846A
Sperry Marine 6 way interswitch unit enables multi radar systems to be connected together so that either Display may be connected to either Scanner Unit.
65901636
Sperry Marine Pulley (84 Groove)/Pulse Disc Assembly. Will need a 3 jaw puller with 9mm socket taped to centre screw to remove. Before install checked belt & pulley is full engagement.
MA00008979
Sperry Marine Pulley Belt PGGT 500mm, 5mm, 40mm. Before install checked belt & pully is full engagement.
65801616-5
This Receiver Unit is used in Sperry Marine X-band transceiver unit.
65801818-2
This RX filter board is used in Sperry Marine X-band receiver unit.
MG5436
E2V Technologies X-Band Magnetron MG5436.
Radar Magnetrons MG5436. Power: 25 kW. Frequency: 9380-9440 Mhz Band: X- band. Base plate: 113 mm
T91005226
The B3LT1649 is a solid state limiter which provides effective receiver protection at power levels up to 25 kW. A filter network is included to give broadband protection against magnetron-generated spurious and second...
T91003865
Sperry Marine 3 phase motor unit input speed.
For 220 V / 240 V, 50/60 Hz 3 phase AC standard speed.
For 380 V / 440 V, 50/60 Hz 3 phase AC standard speed.
T91005220-2
sperry marine performance monitor Unit - B32X1633 . For X band both 10kW & 25kW.