65837AA-AJ
Sperry Marine scanner control unit is to control scanner on/off.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Filter By
65926L-3A
The DuraMON25.5WS LED is the new generation of Category 1 Radar and ECDIS wide screen monitors. With its low power consumption, the DuraMON25.5WS LED obviates the use of cooling fans providing silent/noiseless...
4961AB
The Steering Control Unit (SCU) contains an FU control amplifier and all of the system's in and output interfaces.
T65830616-7
This Receiver Unit is used in Sperry Marine S-band transceiver unit.
4950
The compact space-saving design and low weight of NAVIGAT X / Mod.10 gyro compass allows for installation at virtually any location on board any ship. An easy to read 360o and 10o compass card system permits this...
074881-0001-000
The Repeater Compass System receives through an RS422 serial interface angular information according to which the rotor of a step motor is coupled to the step motor through a gear train. The Repeater Compass System...
022561-0000-000
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin...
EEV MG5424
Compact, rugged, lightweight, magnetron MG5424 X-Band fixed frequency pulses intended for use in marine radar, similar to M5187. The recommended value for the MG5424 voltage is 6.3V, but a magnetron operating...
4863-1000-00
The fluxgate interface with jupiter magnetic compass also provides direction data which can addressed via the TMC function (Transmitting Magnetic Compass) to heading management system(HMS).
073434-0000-000
The JUPITER is a bearing compass, steering compass, reflector compass and overhead compass for large vessels. A “class A” Magnetic Compass with a card diameter of 180 mm.
4994-AC
The NAVITWIN IV Heading Management System displays and monitors a minimum of one and a maximum of four heading sources (3 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
075135-0000-000
Marine Ship C. Plath Type 2535 Azimuth Device for Marine Compass is a vane-type azimuth device, classified as compass bearing device to be used in combination with the bearing repeater, type 5016-CA. It is suitable...
076956-0000-000
The Bearing Device PV24 Type:2695 is especially for magnetic compass type: 2060, 2555. Manual: 056016.
074883-0001-000
Compass repeater for mounting to the bulkhead 360 ° / 10 °, with built-in indication of the source of the course and a dimmer, waterproof.
T65810812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65900800-6A
The PCIO Board has three high speed serial input (38400 baud) and six low speed serial inputs (4800 baud).
Communication to the processor is via an embedded USB hub (TSU). Video and data to the scan converter (SC)...
073517-0000-000
Gyrocompass system NAVIGAT 200 for multiple gyrocompass systems, comprising101
1 Mastercompass NAVIGAT 200, with built-in control and display unit, for connection to 24V DC main supply and 24V DC back-up supply.
T91003746-4
Performance Monitor unit, which warns the operator of reduce radar performance.
May be integral with the turning unit.
T65830505-1C
A serial data link is used to communicate between the Transceiver and the
Console. If a separate Transceiver Unit is used, an RF feeder coaxial for S band
wave guide is used to transfer the microwave energy between...
T65825812-7
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65801809-4
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
65601-222
The lower microwave transition casting is to protect the rotating joint probe.
NGSperry_0613_051
The NAVIKNOT Multi-sensor Speed Log series comprises a uniquely flexible range of speed log systems, for use on many types of vessels, such as cruise ships, container ships, tankers, superyachts and a wide variety of...
65842A
Sperry Marine 2 way interswitch unit enables two radar systems to be connected together so that either Display may be connected to either Scanner Unit.