+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
RP-41
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
TG-6000
Gyrocompass Tokimec TG6000 features longer life and a diverse range of output signals, both the results of TOKYO KEIKI’s extensive experience in design and manufacturing. The TG-6000, in space-saving compact form,...
4914-1500
Northrop Grumman Sperry Marine STO No.: 026765 TYPE: 4914-1500 Encoder for master gyrocompass.
RCU-024
Furuno Keyboard/Trackball Control Unit RCU024 with 5m cable for ecdis system.
4950
The compact space-saving design and low weight of NAVIGAT X / Mod.10 gyro compass allows for installation at virtually any location on board any ship. An easy to read 360o and 10o compass card system permits this...
EC-3000
Furuno Chart Display And Information System FMD-3200 processor unit type EC3000
074881-0001-000
The Repeater Compass System receives through an RS422 serial interface angular information according to which the rotor of a step motor is coupled to the step motor through a gear train. The Repeater Compass System...
HUB100
HUB-100 - Furuno 8 port Ethernet switch. This HUB works on 100-230VAC.
022561-0000-000
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin...
RCU-018
Furuno KBD/TRKBL CONTROL UNIT FEA2107 RCU-018 with 30m cable.
kt-007
Gyrosfer MKT007 - is the main (sensitive) element gyrocompass series Yokogawa CMZ900
EEV MG5424
Compact, rugged, lightweight, magnetron MG5424 X-Band fixed frequency pulses intended for use in marine radar, similar to M5187. The recommended value for the MG5424 voltage is 6.3V, but a magnetron operating...
CMZ 700
Three types are available. CMZ700B drives the repeaters directly from the master compass without the control box. CMZ700S has various inputs and outputs with the control box. CMZ700D is for a dual gyro compass system....
RP-21-2
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
108-010.NG004 E01
The Magnetic Sonde can be connected with Raytheon Anschutz Autopilots, heading reference managing systems, Course Monitor, Steering Control System, Monitor Repeater Compass.
Connecting the sonde electronically is...
10229409
This gyro sphere used in, TG-3000, TG-5000, TG-6000, TG-8000, TG8500.
4863-1000-00
The fluxgate interface with jupiter magnetic compass also provides direction data which can addressed via the TMC function (Transmitting Magnetic Compass) to heading management system(HMS).
073434-0000-000
The JUPITER is a bearing compass, steering compass, reflector compass and overhead compass for large vessels. A “class A” Magnetic Compass with a card diameter of 180 mm.
4994-AC
The NAVITWIN IV Heading Management System displays and monitors a minimum of one and a maximum of four heading sources (3 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
075135-0000-000
Marine Ship C. Plath Type 2535 Azimuth Device for Marine Compass is a vane-type azimuth device, classified as compass bearing device to be used in combination with the bearing repeater, type 5016-CA. It is suitable...
076956-0000-000
The Bearing Device PV24 Type:2695 is especially for magnetic compass type: 2060, 2555. Manual: 056016.