65800700
This no/off switch is to control scanner control unit.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Filter By
NTE-182
JRC's advantage of long range reception has been the basis for this new model. The outside of the transponder is the same as its predecessor, but the inner parts have been completely updated to the latest...
65837AA-AJ
Sperry Marine scanner control unit is to control scanner on/off.
CDJ-3182
JRC CDJ-3182 7PCJD0136C I/O control PCB for connection box NQE-3182.
T65830616-7
This Receiver Unit is used in Sperry Marine S-band transceiver unit.
CQD-3182
JRC JHS-182 AIS Terminal Unit PCB 7PCJD0137A for connection box NEQ-3182
406004A-00500
You can use the Thrane & Thrane 6004 Control Panel as a generic control panel for a number of ThraneLINK applications. Notifications from the applications assist the user in monitoring all applications installed. The...
7000 118-201
The R5 Solid is a single box solution for Automatic Identification System (AIS) on board a vessel. The Solid version of the R5 technology provides the user with a flexible, future proof product. It is easy to install...
CQD-2097
This terminal board is used in NEK1130 marine radar, series JMA-9110.
CMJ-462E
This gyro interface circuit is used in MKE1130 marine radar, series JMA-9110.
CDC-1186D
This ARPA processor circuit is used in MKE1130 marine radar, series JMA9110.
CDC-1325
This AIS processor circuit is used in NEK1130 marine radar, series JMA-9110.
CDC 1324
This Mounting Bracket is used in MKE1130 marine radar. series JMA-9110.
CQC-1192
This motherboard is used in NKE1130 marine radar, series JMA9110.
CME-363
This modulator circuit board is used in JRC JMA series radar.
CBD-1779
This motor CTRL power circuit board is used in JRC JMA series radar.
CBD-1783
This power supply circuit board is used in JRC JMA series radar.
T65810812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65900800-6A
The PCIO Board has three high speed serial input (38400 baud) and six low speed serial inputs (4800 baud).
Communication to the processor is via an embedded USB hub (TSU). Video and data to the scan converter (SC)...
T91003746-4
Performance Monitor unit, which warns the operator of reduce radar performance.
May be integral with the turning unit.
T65830505-1C
A serial data link is used to communicate between the Transceiver and the
Console. If a separate Transceiver Unit is used, an RF feeder coaxial for S band
wave guide is used to transfer the microwave energy between...
T65825812-7
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65801809-4
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...