65837AA-AJ
Sperry Marine scanner control unit is to control scanner on/off.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
HUB-3000
Furuno intelligent hub-3000 for dual ecdis configuration.
T65830616-7
This Receiver Unit is used in Sperry Marine S-band transceiver unit.
HD 24T21 TEC-M3E-AAB2-60029
Manufactured by Hatteland Display AS. Norway 24''...
RCU-024
Furuno Keyboard/Trackball Control Unit RCU024 with 5m cable for ecdis system.
EC-3000
Furuno Chart Display And Information System FMD-3200 processor unit type EC3000
HUB100
HUB-100 - Furuno 8 port Ethernet switch. This HUB works on 100-230VAC.
RCU-018
Furuno KBD/TRKBL CONTROL UNIT FEA2107 RCU-018 with 30m cable.
CQD-2097
This terminal board is used in NEK1130 marine radar, series JMA-9110.
CDC-1186D
This ARPA processor circuit is used in MKE1130 marine radar, series JMA9110.
CDC-1325
This AIS processor circuit is used in NEK1130 marine radar, series JMA-9110.
CDC 1324
This Mounting Bracket is used in MKE1130 marine radar. series JMA-9110.
CQC-1192
This motherboard is used in NKE1130 marine radar, series JMA9110.
CME-363
This modulator circuit board is used in JRC JMA series radar.
CBD-1779
This motor CTRL power circuit board is used in JRC JMA series radar.
CBD-1783
This power supply circuit board is used in JRC JMA series radar.
T65810812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
T65900800-6A
The PCIO Board has three high speed serial input (38400 baud) and six low speed serial inputs (4800 baud).
Communication to the processor is via an embedded USB hub (TSU). Video and data to the scan converter (SC)...
T91003746-4
Performance Monitor unit, which warns the operator of reduce radar performance.
May be integral with the turning unit.
T65830505-1C
A serial data link is used to communicate between the Transceiver and the
Console. If a separate Transceiver Unit is used, an RF feeder coaxial for S band
wave guide is used to transfer the microwave energy between...
T65825812-7
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...