074859-0000-000
This is a Type 4894-AD Terminal Box, used for Type 5016 Bearing Repeater Compass.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
FE-701
The FE-700 is a result of 50 years of Furuno’s vast range of experience and advanced microelectronics technology fields in developing echo sounders, sonars, and underwater application equipment and systems. This echo...
T65825816
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
074834-0000-005
The 4891 Universal Digital Repeater is to display live heading (HDG).
JFE-380
The JFE-380 e.cho sounder continues the tradition of enhanced depth data technology resulting in highly accurate and reliable read-out functionalit.
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
074880-0001-000
This is a Type 5016 Bearing repeater compass. Does not come with Type 4894-AD terminal box.
JFE-680
The powerfully built, all-in-one JFE-680 echo sounder integrates advanced depth data technology, displaying sub aqua conditions with startling effectiveness.
T65830642-3
Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.
V8123SA
This PCB mainboard V8123SA is used for Yokogawa CMZ 700 gyro new type.
S5100
The S5100 features three fully independent channels able to deliver high-resolution CHIRP sonar coverage across multiple depth ranges. Mix and match up to three transducers to provide the perfect coverage for any...
T65801811-9
This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.
Sailor 6018
The SAILOR 6018 Message Terminal is designed to enhance the efficiency of safety communication as the defining component in a SAILOR 6000 GMDSS installation, as Inmarsat mini-C or as a radiotelex terminal. Regardless...
KT005
Gyrosphere for Yokogawa CMZ 700. Requires at least 1 hour for gyrosphere to settle.
Sailor 6000
Sailor 6000 GMDSS A2 150W + extra Radio Telex - Incl. Console.
T65830812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
133 407
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
BP234
Non-rechargeable high capacity lithium battery 9 volts 3300mAh for the Icom GM1600E SMSSM (GMDSS) SOLAS. Up to 8 hours at –20ºC. Required by many authorities for liferaft use.
T65801813-8
On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.
133-811
The Raytheon Anschutz Digital Repeater Compass indicates heading by using a large display. Heading can be read easily from different viewing angles up to a distance of ten metres. The decimal degree digit is smaller...
52 603 8001
LAZ 5100 is the latest navigation echo sounder of L-3 ELAC Nautik, available as single- or dual-frequency unit. Transducers with frequencies from 24 kHz to 200 kHz can be connected, the maximum measuring range is 2...
TVH-03-2001
Sperry Marine BME Slave Connection Unit.
4923-AA
The NAVITWIN III Heading Management System displays and monitors a minimum of one and a maximum of three heading sources (2 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
EN101C-SA
The SKIPPER GDS101 Echo Sounder graphics are continuously shown on the LCD along with relevant navigational details. External connectors are provided for printer, VGA and NMEA in/output.
The GDS101 contains history...