Products (2)

Sperry Marine Transceiver Power supply X-Band

T65825816

This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...

JRC CRM Mini ITX Ecdis

DFI HR100

This CRM mini ITX used in JRC Ecdis JAN 701B/901B.

Furuno Navtex High Sensitivity Antenna NX-7(NEW)

NX-7

The NX700 has a low profile, stylish display, receiver and antenna unit. An external Serial (RS-232) printer can easily be connected for message printing. The compact, umbrella-type H-field antenna requires no...

Sperry Marine SC3 PCB Card VMFT

T65900812-3

This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.

JRC Processor PSU Ecdis

eNSP-300P-S20-11S

This processor PSU is for JRC Ecdis 701B/901B.

JRC Seiko Navtex Thermal Printer DPU-414

DPU-414

The Mitutoyo DPU-414 thermal printer allows printing of measurement data. This printer can be connected to the LSM-5200, LSM-6200, LSM-6900 and LSM-9506 laser scan micrometers. Both measurement values and statistical...

Sperry Marine Radar Rotary Joint S-Band

T65830642-3

Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.

JRC Power Supply Unit Ecdis

NBD-904

This Power Supply Unit is for JRC ecdis JAN 701B/901B.

JRC Navtex Antenna NAW-333

NAW-333

NAW-333 is an active antenna of the company JRC, intended for use with the NAVTEX receiver JRC NCR-333. This antenna works on all Navtex frequencies: 518 kHz, 490 kHz, 4209 kHz. NAW-333 corresponds to the degree of...

Sperry Marine Radar Motor Drive PCB

T65801811-9

This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.

JRC AC-DC PSU Ecdis

AES150-12

This AC-DC PSU used for 19 inch JRC monitor.

McMurdo NAV-7 Colour GMDSS Navtex Receiver(NEW)

35-860-001

The NAV-7 has been designed to meet the requirements of IMO (Intentional Maritime Organisation) MSC.148 (77) and IEC technical standard 61097-6 (Ed 2.0). The NAV-7 has three separate receiver channels, one each tuned...

JRC Operation Unit Keyboard Ecdis

NCE-5163-E

This operation unit used in ecdis system.

Furuno Fax30 External Black Box Weatherfax And Navtex Receiver(NEW)

FAX-30

Furuno's new FAX30 can turn any NavNet display or PC into a Weatherfax and Navtex receiver. This waterproof "Black Box" unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it...

Sperry Marine 30kW Modulator PCB S-Band

T65830812-6

The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...

JRC Gyro Interface Circuit

CMJ-462E

This gyro interface circuit is used in MKE1130 marine radar, series JMA-9110.

ICS Passive NAVTEX Antenna(NEW)

ICS.904.02

The ICS Passive NAVTEX Antenna is the perfect antenna for our NAVTEX products. This antenna is tuned to receive 490-518kHz with an impedance of 50 ohm. Included with this antenna is a 10 metre coax cable.

Sperry Marine Input PCB Aloft Radar

T65801813-8

On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.

Danelec Marine DM700 Ecdis (NEW)

DM700

Complete & flexible ECDIS platform The Danelec ECDIS range is Wheelmark approved by DNV GL, and complies with all applicable IMO requirements defined in MSC.232(82), as well as the revised IEC and IHO performance...

ICS Active Navtex Antenna(NEW)

ICS.905.05

The ICS Active NAVTEX Antenna is one of the two recommended active antennas supplied by ICS. This is a wideband antenna optimised to receive 490-518kHz with an impedance of 50 ohm.

Sperry Marine BME Slave Connection Unit

TVH-03-2001

Sperry Marine BME Slave Connection Unit.

Danelec Marine DM800 Ecdis (NEW)

DM800

Complete & flexible ECDIS platform The Danelec ECDIS range is Wheelmark approved by DNV GL, and complies with all applicable IMO requirements defined in MSC.232(82), as well as the revised IEC and IHO performance...

JRC JHS183 AIS Connection Box NQE-5183

NQE-5183

Automatic Identification System (AIS) is a maritime navigation and radio communication system. This system intends to enhance the safety of life at sea, the safety and efficiency of navigation and the protection of...

Sperry Marine VMFT Control Panel

65900667-3C

Sperry Marine VMFT Control Panel is used in all Sperry Marine stand alone radar systems.

Products

Sperry Marine Transceiver Power supply X-Band

JRC CRM Mini ITX Ecdis

Furuno Navtex High Sensitivity Antenna NX-7(NEW)

Sperry Marine SC3 PCB Card VMFT

JRC Processor PSU Ecdis

JRC Seiko Navtex Thermal Printer DPU-414

Sperry Marine Radar Rotary Joint S-Band

JRC Power Supply Unit Ecdis

JRC Navtex Antenna NAW-333

Sperry Marine Radar Motor Drive PCB

JRC AC-DC PSU Ecdis

McMurdo NAV-7 Colour GMDSS Navtex Receiver(NEW)

JRC Operation Unit Keyboard Ecdis

Furuno Fax30 External Black Box Weatherfax And Navtex Receiver(NEW)

Sperry Marine 30kW Modulator PCB S-Band

JRC Gyro Interface Circuit

ICS Passive NAVTEX Antenna(NEW)

Sperry Marine Input PCB Aloft Radar

Danelec Marine DM700 Ecdis (NEW)

ICS Active Navtex Antenna(NEW)

Sperry Marine BME Slave Connection Unit

Danelec Marine DM800 Ecdis (NEW)

JRC JHS183 AIS Connection Box NQE-5183

Sperry Marine VMFT Control Panel

Enquire Now

Menu

Account

Search