+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
JLR-4340
Capable of SBAS (WAAS/EGNOS/MSAS) correctionRAIM function is available12-Channel Parallel for simultaneous reception of 12 satellites.IEC61162-1, NMEA0183 Output
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
JLR4341
Internal Differential Beacon ReceiverCapable of SBAS (WAAS/EGNOS/MSAS) correctionRAIM function is available12-Channel Parallel for simultaneous reception of 12 satellitesIEC61162-1, NMEA0183 Output
T65830642-3
Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.
NBD-904
This Power Supply Unit is for JRC ecdis JAN 701B/901B.
GPA017
The antenna consists of the antenna for receiving GPS signal, the filter for band limitation and the preamplifier for signal amplification.
T65801811-9
This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.
GPA017S/S
The antenna consists of the antenna for receiving GPS signal, the filter for band limitation and the preamplifier for signal amplification.
GPA021
The antenna consists of the antenna for receiving GPS signal, the filter for band limitation and the preamplifier for signal amplification.
T65830812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
CMJ-462E
This gyro interface circuit is used in MKE1130 marine radar, series JMA-9110.
T65801813-8
On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.
DM700
Complete & flexible ECDIS platform The Danelec ECDIS range is Wheelmark approved by DNV GL, and complies with all applicable IMO requirements defined in MSC.232(82), as well as the revised IEC and IHO performance...
MX510
The MX510 is a versatile navigation system that offers extraordinary capabilities, with its multi-port interface that can be connected to ECDIS, ARPA, Gyro and other navigation information systems.
Optional software...
TVH-03-2001
Sperry Marine BME Slave Connection Unit.
DM800
Complete & flexible ECDIS platform The Danelec ECDIS range is Wheelmark approved by DNV GL, and complies with all applicable IMO requirements defined in MSC.232(82), as well as the revised IEC and IHO performance...
GS15
Advanced 5Hz performance with a true update rate of 5 times per second for best in class position data during acceleration and high speed manoeuvres.
The Simrad GS15 works with SimNet and NMEA 2000® networks for...
65900667-3C
Sperry Marine VMFT Control Panel is used in all Sperry Marine stand alone radar systems.
ECDIS-E
The Electronic Chart Display and Information System ECDIS-E is an easy and cost-effective retrofit solution that complies with the latest performance standards.
The ECDIS-E combines an optimised feature set with...
GS25
Simrad's GS25 GPS antenna is the ideal GPS for any navigator that requires extremely accurate and rapid vessel position and speed updates.