TG-8000 is designed based on previous TG model which has been installed on more than 8000 ships, keeping its high reliability, enhanced follow-up performance and interfacing features for equipment. TG-8000 is designed...
This series is a compact version of the ES Series, and is chiefly used in small vessels. Gyrocompass instrumentation for heading reference is now available at reasonable cost to operators of small commercial vessels...
Gyrocompass tokimec ES-110, the newest type of ES series, is a compact and popularized gyrocompass. It is especially designed for medium and small vessels' uses, by TOKIMEC's latest mechatronics technology. ES-110...
Gyrocompass Tokimec TG-3000, designed for medium and large ships. Safe navigation is assured by this highly reliable gyrocompass, which features a unique gyrosphere suspension system and the latest electronics...
Gyrocompass Tokimec TG-5000 has been manufactured following the development of sperry-type MK.14 and MK-EN gyro compasses in addition to MK-ES, TG-100 and similar other models developed by Tokyo Keiki.The TG-5000 is...
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
Gyrocompass Tokimec TG6000 features longer life and a diverse range of output signals, both the results of TOKYO KEIKI’s extensive experience in design and manufacturing. The TG-6000, in space-saving compact form,...
The compact space-saving design and low weight of NAVIGAT X / Mod.10 gyro compass allows for installation at virtually any location on board any ship. An easy to read 360o and 10o compass card system permits this...
The Repeater Compass System receives through an RS422 serial interface angular information according to which the rotor of a step motor is coupled to the step motor through a gear train. The Repeater Compass System...
Inside the gyrosphere container, the gyrosphere floats in a supporting fluid with a buoyancy that is a little greater than its weight, a bearing cup at the bottom of the recess is pressed against the centering pin...
Compact, rugged, lightweight, magnetron MG5424 X-Band fixed frequency pulses intended for use in marine radar, similar to M5187. The recommended value for the MG5424 voltage is 6.3V, but a magnetron operating...
Three types are available. CMZ700B drives the repeaters directly from the master compass without the control box. CMZ700S has various inputs and outputs with the control box. CMZ700D is for a dual gyro compass system....
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
The Magnetic Sonde can be connected with Raytheon Anschutz Autopilots, heading reference managing systems, Course Monitor, Steering Control System, Monitor Repeater Compass.
Connecting the sonde electronically is...
The fluxgate interface with jupiter magnetic compass also provides direction data which can addressed via the TMC function (Transmitting Magnetic Compass) to heading management system(HMS).
The JUPITER is a bearing compass, steering compass, reflector compass and overhead compass for large vessels. A “class A” Magnetic Compass with a card diameter of 180 mm.
The NAVITWIN IV Heading Management System displays and monitors a minimum of one and a maximum of four heading sources (3 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
Marine Ship C. Plath Type 2535 Azimuth Device for Marine Compass is a vane-type azimuth device, classified as compass bearing device to be used in combination with the bearing repeater, type 5016-CA. It is suitable...