Products (2)

JRC Seiko Navtex Thermal Printer DPU-414

DPU-414

The Mitutoyo DPU-414 thermal printer allows printing of measurement data. This printer can be connected to the LSM-5200, LSM-6200, LSM-6900 and LSM-9506 laser scan micrometers. Both measurement values and statistical...

Sperry Marine Radar Rotary Joint S-Band

T65830642-3

Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.

JRC Navtex Antenna NAW-333

NAW-333

NAW-333 is an active antenna of the company JRC, intended for use with the NAVTEX receiver JRC NCR-333. This antenna works on all Navtex frequencies: 518 kHz, 490 kHz, 4209 kHz. NAW-333 corresponds to the degree of...

Sperry Marine Radar Motor Drive PCB

T65801811-9

This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.

McMurdo NAV-7 Colour GMDSS Navtex Receiver(NEW)

35-860-001

The NAV-7 has been designed to meet the requirements of IMO (Intentional Maritime Organisation) MSC.148 (77) and IEC technical standard 61097-6 (Ed 2.0). The NAV-7 has three separate receiver channels, one each tuned...

Furuno Fax30 External Black Box Weatherfax And Navtex Receiver(NEW)

FAX-30

Furuno's new FAX30 can turn any NavNet display or PC into a Weatherfax and Navtex receiver. This waterproof "Black Box" unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it...

Sperry Marine 30kW Modulator PCB S-Band

T65830812-6

The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...

ICS Passive NAVTEX Antenna(NEW)

ICS.904.02

The ICS Passive NAVTEX Antenna is the perfect antenna for our NAVTEX products. This antenna is tuned to receive 490-518kHz with an impedance of 50 ohm. Included with this antenna is a 10 metre coax cable.

Sperry Marine Input PCB Aloft Radar

T65801813-8

On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.

ICS Active Navtex Antenna(NEW)

ICS.905.05

The ICS Active NAVTEX Antenna is one of the two recommended active antennas supplied by ICS. This is a wideband antenna optimised to receive 490-518kHz with an impedance of 50 ohm.

Sperry Marine BME Slave Connection Unit

TVH-03-2001

Sperry Marine BME Slave Connection Unit.

JRC JHS183 AIS Connection Box NQE-5183

NQE-5183

Automatic Identification System (AIS) is a maritime navigation and radio communication system. This system intends to enhance the safety of life at sea, the safety and efficiency of navigation and the protection of...

Sperry Marine VMFT Control Panel

65900667-3C

Sperry Marine VMFT Control Panel is used in all Sperry Marine stand alone radar systems.

Furuno NX700 Receiver Board

08P3227

Furuno NX700 receiver board is used in Navtex NX700 A/B.

Sperry Marine Serial Interface Unit

65847A

This is a Sperry Marine radar serial interface unit.

Furuno Fax-5 Active Weather/Navtex antenna

FAX-5

Furuno Fax-5 Active Weather/Navtex antenna

Sperry Marine VMFT Motherboard

DG43NB

This is a Sperry Marine VMFT original manufacturer approved motherboard. Supports CD Rom, video card, hard disk, sc2 or cs3 card, rams, USB port, VGA port.