074859-0000-000
This is a Type 4894-AD Terminal Box, used for Type 5016 Bearing Repeater Compass.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
Sailor 6390
The SAILOR 6391 Navtex System sets new standards in functionality and flexibility for SOLAS mandated Navtex receivers. As a black box system, with separate touch screen user-interface, it introduces a new approach...
T65825816
This PSU board in x-band transceiver, provide high voltage DC is present to all primary power components. This voltage is present even when the unit is switch OFF. The high voltage is only removed if the unit is...
074834-0000-005
The 4891 Universal Digital Repeater is to display live heading (HDG).
NX-7
The NX700 has a low profile, stylish display, receiver and antenna unit. An external Serial (RS-232) printer can easily be connected for message printing. The compact, umbrella-type H-field antenna requires no...
T65900812-3
This SC3 card is an assembly in the motherboard. It need a cable assy to connect to PCIO TSS port. It converts raw video into digitize video for PC to process the radar echo.
074880-0001-000
This is a Type 5016 Bearing repeater compass. Does not come with Type 4894-AD terminal box.
DPU-414
The Mitutoyo DPU-414 thermal printer allows printing of measurement data. This printer can be connected to the LSM-5200, LSM-6200, LSM-6900 and LSM-9506 laser scan micrometers. Both measurement values and statistical...
T65830642-3
Turning unit contains the Antenna rotation motor, the microwave rotary joint, and may contain an integral Transceiver.
V8123SA
This PCB mainboard V8123SA is used for Yokogawa CMZ 700 gyro new type.
NAW-333
NAW-333 is an active antenna of the company JRC, intended for use with the NAVTEX receiver JRC NCR-333. This antenna works on all Navtex frequencies: 518 kHz, 490 kHz, 4209 kHz. NAW-333 corresponds to the degree of...
T65801811-9
This board is use on the X-band Scanner Unit, signal is fed to the Power Supply Unit and via the Turning Unit On/Off and Input PCB to the Motor Drive PCB to start the antenna rotating.
35-860-001
The NAV-7 has been designed to meet the requirements of IMO (Intentional Maritime Organisation) MSC.148 (77) and IEC technical standard 61097-6 (Ed 2.0). The NAV-7 has three separate receiver channels, one each tuned...
KT005
Gyrosphere for Yokogawa CMZ 700. Requires at least 1 hour for gyrosphere to settle.
FAX-30
Furuno's new FAX30 can turn any NavNet display or PC into a Weatherfax and Navtex receiver. This waterproof "Black Box" unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it...
T65830812-6
The principal function of the Modulator PCB is to generate an 8kV,8A negative pulse to drive the cathode of the magnetron. An SCR is used to resonantly charge a Pulse Forming Network (PFN) to -1200V from the-600V...
133 407
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
ICS.904.02
The ICS Passive NAVTEX Antenna is the perfect antenna for our NAVTEX products. This antenna is tuned to receive 490-518kHz with an impedance of 50 ohm. Included with this antenna is a 10 metre coax cable.
T65801813-8
On the Scanner Unit, signal is fed, via the Power Supply Unit, to the Input PCB and, via TSB 10, to the Scanner Control Unit to start the antenna rotating.
133-811
The Raytheon Anschutz Digital Repeater Compass indicates heading by using a large display. Heading can be read easily from different viewing angles up to a distance of ten metres. The decimal degree digit is smaller...
ICS.905.05
The ICS Active NAVTEX Antenna is one of the two recommended active antennas supplied by ICS. This is a wideband antenna optimised to receive 490-518kHz with an impedance of 50 ohm.
TVH-03-2001
Sperry Marine BME Slave Connection Unit.
4923-AA
The NAVITWIN III Heading Management System displays and monitors a minimum of one and a maximum of three heading sources (2 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
NQE-5183
Automatic Identification System (AIS) is a maritime navigation and radio communication system. This system intends to enhance the safety of life at sea, the safety and efficiency of navigation and the protection of...