074880-0001-000
This is a Type 5016 Bearing repeater compass. Does not come with Type 4894-AD terminal box.
+65 6909 8211/13, info[at]globalshipspares[dot]com (Asia)
info-europe[at]globalshipspares[dot]com (EU)
Categories
Filter By
Filter By
Products
DPU-414
The Mitutoyo DPU-414 thermal printer allows printing of measurement data. This printer can be connected to the LSM-5200, LSM-6200, LSM-6900 and LSM-9506 laser scan micrometers. Both measurement values and statistical...
V8123SA
This PCB mainboard V8123SA is used for Yokogawa CMZ 700 gyro new type.
NAW-333
NAW-333 is an active antenna of the company JRC, intended for use with the NAVTEX receiver JRC NCR-333. This antenna works on all Navtex frequencies: 518 kHz, 490 kHz, 4209 kHz. NAW-333 corresponds to the degree of...
35-860-001
The NAV-7 has been designed to meet the requirements of IMO (Intentional Maritime Organisation) MSC.148 (77) and IEC technical standard 61097-6 (Ed 2.0). The NAV-7 has three separate receiver channels, one each tuned...
KT005
Gyrosphere for Yokogawa CMZ 700. Requires at least 1 hour for gyrosphere to settle.
FAX-30
Furuno's new FAX30 can turn any NavNet display or PC into a Weatherfax and Navtex receiver. This waterproof "Black Box" unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it...
133 407
The Bearing Repeater Compass indicates the ships heading, the direction of the ship's fore and aft line, ascertained and electrically transmitted by the gyro compass (or a GPS-Compass) and referred to geographical...
ICS.904.02
The ICS Passive NAVTEX Antenna is the perfect antenna for our NAVTEX products. This antenna is tuned to receive 490-518kHz with an impedance of 50 ohm. Included with this antenna is a 10 metre coax cable.
133-811
The Raytheon Anschutz Digital Repeater Compass indicates heading by using a large display. Heading can be read easily from different viewing angles up to a distance of ten metres. The decimal degree digit is smaller...
ICS.905.05
The ICS Active NAVTEX Antenna is one of the two recommended active antennas supplied by ICS. This is a wideband antenna optimised to receive 490-518kHz with an impedance of 50 ohm.
4923-AA
The NAVITWIN III Heading Management System displays and monitors a minimum of one and a maximum of three heading sources (2 gyrocompass headings and 1 magnetic heading) from a variety of heading sensors.
NQE-5183
Automatic Identification System (AIS) is a maritime navigation and radio communication system. This system intends to enhance the safety of life at sea, the safety and efficiency of navigation and the protection of...
MKR050
Steering repeater compass with vernier card, LED dimmer and build-in automatic heading alignment.
08P3227
Furuno NX700 receiver board is used in Navtex NX700 A/B.
110-233.101X10
This PCB is used on a Raytheon Anschutz ST22 Gyro.
FAX-5
Furuno Fax-5 Active Weather/Navtex antenna
074829-0000-000
The Northrop Grumman Sperry Marine Gyro Compass is the most reliable in the market due to its unique feature to float in supporting fluid inside the gyrosphere container.
NT-1800
NT-1800 Dual Frequency Navtex Receiver
Japan Marine Co. Ltd.
026560-0000-000
Sperry Marine switch over unit enable two gyro system to be connect together so that either each heading maker can be control and display in UDR Bulkhead Display.
111-006.E001
The Gyrosphere for Standard 20 and 22, item number 111-006.E001AT.
TG-8000
TG-8000 is designed based on previous TG model which has been installed on more than 8000 ships, keeping its high reliability, enhanced follow-up performance and interfacing features for equipment. TG-8000 is designed...
GM-20
This series is a compact version of the ES Series, and is chiefly used in small vessels. Gyrocompass instrumentation for heading reference is now available at reasonable cost to operators of small commercial vessels...